Product Details
Hantek DSO2D15 - 2 in 1 storage oscilloscope & DDS signal generator: 2CH + 1CH, 150 MHz, 1GSa/s, 8M
The lab oscilloscope is with 150 MHz bandwidth; 8 M memory depth; 1 GSa/s real-time sampling rate and vertical resolution 8bit; 2 channels which are respectively controlled by independent knobs.
AWG supports - The hantek oscilloscope built-in 1 channel 25 MHz waveform generator, support arbitrary waveform burst output, support modulation waveform output.
-
The Hantek DSO2000 series oscilloscope is an evolution of the DSO5000P series, but with better cost. It employs a new generation of technology that provides excellent signal fidelity and performance.
It covers the bandwidths from 100 MHz to 150 MHz, and provide the real-time up to 1 GSa/s. In addition, they have 7 inch color TFT LCD as well as WINDOWS-style interfaces and menus for easy operation.
What’s more, the plenty menu information and the easy-to-operate buttons allow you to gain information as much as possible in measurement; the multifunctional knobs and the powerful shortcut keys help you save a lot of time in operation; the Auto Scale function lets you detect sine and square waves automatically.
The Hantek DSO2000 Series includes 4 models: DSO2D15, DSO2D10, DSO2C15, DSO2C10.
Specifications DSO2D15 DSO2D10 DSO2C15 DSO2C10 Bandwidth 150 MHz 100 MHz 150 MHz 100 MHz Oscilloscope channels 2 CH 2 CH 2 CH 2 CH Waveform generator 1 CH 1 CH - - Oscilloscope Horizontal Horizontal scale range 2ns/div~100s/div 1, 2, 5 step by step Delta time measurement accuracy (full bandwidth) Single, sampling mode ± (1 sample interval +100ppm × reading + 0.6ns) > 16 times above average ± (1 sample interval + 100ppm × reading + 0.4ns) Sample interval = s/div ÷ 200 Vertical Vertical resolution 8 bits resolution, each channel samples simultaneously Vertical sensitivity 2mV/div to 10V/div Offset range ≥ 200mV/div, ±1V; < 200mV/div ±50V Bandwidth limit 20MHz Low frequency response (-3db) In BNC position ≤ 10Hz Rising time in BNC position (typical) 2.4ns 3.5ns 2.4ns 3.5ns Vertical gain accuracy ±3% for normal or average acquisition mode, 10V/div to 10mV/div ±4% for normal or average acquisition mode, 5mV/div to 2mV/div Vertical offset accuracy ±0.1div±2mV±1% Offset Rögzítés Sample rate 1GSa/s (single channel) 500MSa/s (two channels) Equivalent sampling 50GSa/s Acquisition modes Normal, peak, average and high resolution Waveform interpolation (sin x)/x Acquisition rate, typical Up to 2000 waveform per second per channel (Normal acquisition mode, no
measurement)Minimum detection pulse width 2ns Single sequence Acquisition mode Acquisition stop time Normal, peak detect Upon single acquisition on all channels simultaneously Average After N acquisitions on all channels simultaneously, N can be set to 4, 8, 16, 32, 64 or 128 Memory depth Single channel maximum 8M; two channels maximum 4M Trigger Trigger mode Auto, Normal, single Level CH1~CH2 ±5 divisions from the center of the screen EXT (Only With AWG Model) 0~3.3V Holdoff range 20ns~10s Trigger level accuracy CH1~CH2 0.2 div×volts/div within ±4 divisions from the center of the screen Trigger Sensitivity ±0.2div Edge trigger Slope Rising, falling, rising & falling Signal source CH1, CH2, EXT(Only With AWG Model) Pulse width trigger Polarity Positive, negative Condition <, >, !=, = Signal source CH1~CH2 Width range 8ns ~ 10s Video trigger Signal standard NTSC, PAL Signal source CH1~CH2 Synchronization Scanning line, line number, odd field, even field, all field Slope trigger Slope rising, falling Condition <, >, !=, = Signal source CH1 ~ CH1 Time range 8ns ~ 10s Overtime trigger Signal source CH1~CH2 Polarity Positive polarity, negative polarity Time range 8ns ~ 10s Window trigger Signal source CH1~CH2 Pattern trigger Pattern 0: low level; 1: high level; X: ignore Level CH1~CH1 Interval trigger Slope rising, falling Condition <, >, !=, = Signal source CH1~CH1 Time range 8ns ~ 10s Under Amp trigger Polarity Positive polarity, negative polarity Condition <, >, !=, = Signal source CH1~CH1 Time range 8ns ~ 10s UART trigger Condition Start, Stop, data, Parity ERR, COM ERR Signal source CH1~CH2 Data format Hex (hexadecimal) Data length 0 byte Data bit width 4 bit, 6 bit, 7 bit, 8 bit Parity check none, odd, even Idle level high, low Baud rate (selectable) 110 /300 /600 /1200 /2400 /4800 /9600 /14400 /19200 /38400 /57600 /115200 /230400 /380400 /460400 bit/s Baud rate (user-defined) 300bit/s~334000bit/s LIN trigger Condition Interval field, synchronization field, ID field, synchronization error, identifier, ID and data Signal source CH1~CH1 Data format Hex Baud rate (selectable) 110 /300 /600 /1200 /2400 /4800 /9600 /14400 /19200 /38400 /57600 /115200 /230400 /380400 /460400 bit/s Baud rate (user-defined) 300bit/s~334000bit/s CAN trigger Condition Start bit, remote frame ID, data frame ID, frame ID, data frame data, error frame, all errors, ACK Error, overload frame Signal source CH1~CH1 Data format Hex Baud rate (selectable) 10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 999999 Baud rate (user-defined) 5kbit/s~1Mbit/s SPI trigger Signal source CH1~CH1 Data format Hex Data length 4, 8, 16, 24, 31 IIC trigger Signal source (SDA/SCL) CH1~CH1 Data format Hex Data index 0~2 Condition Start bit, stop bit, No Ack, address, restart, address and data Input Number of channels 2 analog channels Input coupling DC, AC, GND Input impedance 20pF±3pF, 1MΩ±2% Supported probe attenuation 1X, 10X, 100X, 1000X Voltage rating 300V CAT II Maximum input voltage 300VRMS (10X) Isolation between channels >40dB Delay deviation between channels <500ps Measurement Cursor Voltage difference between cursors: △V Time difference between cursors: △T Reciprocal of △T in Hertz (1/△T) Auto measurement PkPk, Frequency, Average, Max, Min, Period, Vtop, Vmid, Vbase, Vamp, RMS, R-Overshoot, PeriodRms, F-Preshoot, PeriodRms, PeriodAvg, RiseTime, FallTime, + Width,- Width, + Duty, - Duty, FRR, FFF, F-Overshoot, R-preshoot, BWidth, FRF, FFR, LRR, LRF, LFR and LFF DVM Data source CH1, CH1 Measurement type DC RMS, AC RMS, DC Frequency meter hardware 6 bits Math operation Source CH1~CH2 Operator +, -, ×, ÷, FFT FFT Point 1024 Window Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop Display Show only or show all Vertical scale dB, VRms Storage Save/recall (non-volatile) 9 types of files can be saved and recalled internally, including settings, waveforms, and references Save to external memory CSV file, BMP picture (24 bit) Arbitrary waveform generator Channel 1 x Standard waveforms sine, square, ramp,Exp, noise, DC x Sin Frequency range 0.1Hz~25MHz x Square Frequency range 0.1Hz~10MHz x Duty 1%~99% x Ramp Frequency range 0.1Hz~1MHz x Symmetry 1%~100% x Exponential Frequency range 0.1Hz~5MHz x Noise Bandwith ＞25MHz x DC Offset 1.75V(50Ω), 3.5V(High resistance) x Arbitrary wave Frequency range 0.1Hz~5MHz x Wave length 4096 x Support PC download and external memory recall x Output impedance 50 Ω+1%, high impedance x Amplitude 5mV~3.5Vpp(50Ω); 10mV~7Vpp (High impedance) x Amplitude accuracy ±3dB x Waveform depth 4KSa x Frequency Accuracy 99 ppm (<10 kHz) 50 ppm (>10 kHz) x Resolution 1uHz x General specifications Display Display type 7'' TFT Display resolution 800 (horizontal)*480 (vertical) pixels Display colour 15 million colours (24 bits true colour) Persistence time minimum, 1 s, 5 s, 10 s, 30 s, infinite Display type dot, vector Display brightness adjustable Grid type adjustable Grid brightness adjustable Interface Standard interface USB Host，USB Device Power supply Supply Voltage 100-120VACRMS(±10%), 45Hzto 440Hz, CATⅡ 120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ Power consumption <15W Fuse T, 3.15A, 250V, 5x20mm Environmental Operating temperature 0~50 °C (32~122 °F) Storage temperature -40~+71 °C (-40~159.8 °F) Humidity ≤+40°C: ≤90% RH; +41°C ~50°C: ≤60% RH Device size 316x11x150 mm Device weight 1900 g Package size 36x21x19 cm Package weight 2640 g Package list 1*Oscilloscope; 1*Probe (10x); 1*power line; 1*USB line; 2 * Alligator Clip Line 
-
manufacturer Hantekgarantie 2 yearsStock In stockArticle No. han-dso2d15Weight 2.7 kg/pcs
-
hantek-DSO2xxx-brochure.pdf hantek-DSO2xxx-manual (en).pdf
Hantek website: manual, firmware, software: link
