FNIRSI 2C23T - 3 in 1 handheld oscilloscope, multimeter, DDS generator: 2 channels, 10 MHz bandwidth
FNIRSI 2C23T: 3 in 1 handheld oscilloscope, multimeter, DDS generator: 2 channels, 10 MHz bandwidth, 50 MSa/s sampling rate, 10000 counts, voltage, current, capacitor, resistor, diode test.
-
> Oscilloscope Mode: 2 channel handheld oscilloscope, 10MHz bandwidth, real-time sampling rate 50MSa/s, record depth 32 kb, maximum measurement voltage ±400 V, automatic measurement function, trigger function auto/normal/single, 200mV/div-10v/div vertical sensitivity, support waveform image storage and export.
> Multimeter Mode: 4-digit 10000 counts. AC Voltage: 0-750 V, DC Voltage: 0-999.9 V, DC/AC current: 0-9.999 A, resistance: 0-99.99 MΩ, capacitance: 0-99.99 mF, temperature: -55°C-1300°C/-67~2372℉, diode, continuity measurement. An ideal multi-function meter for professionals, factories, schools, hobbyists or home use.
> Signal Generator: The maximum waveform output frequency can reach 2 MHz and a step of 1Hz, and can output seven waveforms including sine, square, triangle, full, half, noise, and DC.
Excellent Design: The oscilloscope adopts FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, adopts 2.8-inch 320*240 resolution HD LCD display, built-in 3000 mAh rechargeable Li-ion battery, standby time up to 6 H, Type-C interface supports 5V/1A power adapter charging.
> Save function: one-click save, screening function. You can upload the saved image by connecting to PC via Type-C. You can easily compare the waveforms by displaying the reference waveform and the measured waveform on the same screen.FNIRSI 2C23T specifications Oscilloscope Channels 2 Bandwidth 10 MHz Real-time Sample Rate 50 MS/s Storage Depth 32 kB Input Coupling DC, AC Input Impedance 1 MΩ Probe Attenuator 1 X, 10 X Highest Test Voltage 40 V (1 X), 400 V (10 X) Time Base Range 50 ms - 10 s Vertical sensitivity 20 mV/div - 10 V/div (X1) Trigger Mode Auto, Normal, Single Trigger Type Rising /Falling edge Save waveform screenshot √ Computer viewing waveform √ Signal generator Channel single channel Frequency 1 HZ - 2 MHz Amplitude 0.1 - 3.3 V Waveforms 7 Digital multimeter Range Accuracy DC voltage 9.9999 /99.99 /999.9 V ±(0.5%+3) AC voltage 9.9999 /99.99 /750.0 V ±(1%+3) DC current 9999 uA /99.99 mA /999.9 mA /9.999 A ±(1.2%+3) AC current 10000 uA /99.99 mA /999.9 mA /9.999 A ±(1.5%+3) Resistance 9.999MΩ /999.9kΩ /99.99kΩ /9.999kΩ /999.9 Ω ±(0.5%+3) 99.99 MΩ ±(1.5%+3) Capacitance 999.9uF /99.99uF /9.999uF /999.9nF /99.99nF /9.999nF ±(2%+5) 999.9mF /99.99mF ±(2.5%+20) Diode √ Continuity √ Live line detection √ General informations Screen 2.8-inch true color screen Resolution 320 * 240 Battery 3000 mAh lithium battery Töltőport Type-C Device size 170x88x33 mm Device weight 290 g Package size 260x130x85 mm Package weight 600 g Items in the package 1 x 2C23T oscilloscope, 2 x P6100 probe, 1 x crocodile clip, 1 x multimeter probe, 1 x charging wire, 1 x instruction manual 
-
manufacturer FNIRSIgarantie 1 yearStock In stockArticle No. fni-2c23tWeight 600 g/pcs
-
Firmware:
Check the firmware version of your device: config > about, and check the manufacturer's website to see if there is a newer version.
Download:If so, download the packed files to your computer.
Unzip the file with the English "bin" extension into a folder.
Connect the switched-off device to the computer via the USB-C port on the side, then press the power button while holding down the menu button. "Bootloader". In the pop-up window, enable the PC to act as a USB flash drive. Then in the new pop-up window, drag (copy) the prepared "bin" file. The installation will be performed automatically and the menu will load. Done.
Manual:The manual is also available at the links above.
