Noyafa NF-859GS - cable tester: PoE test, continuity, scanning, power test, port flash, QC test etc.
New multifunctional network cable tester: the basic device (transmitter) is the same as the NF-8209s; the receiver is a new development: model NF-859G, which has been given new stand-alone functions.
The older main functions of the set are PoE test, continuity, scan, power test, port flash, QC test, cable length measurement, etc.
New features of recevier: PoE information, standalone wire test, crimping test, VFL.
-
> Multifunction network cable tester: POE test, anti-interference RJ11, RJ45 CAT5, CAT5E, CAT6, CAT6A, telephone line CAT3 cable test, continuity test, port flashing, sensitivity adjustment, cable Function of length test and LED flashlight, UTP/STP test.
> Cable length & fault distance: Accurately measure the cable length without calibration, and the range is 2.5-200 m. It can detect the cross, short circuit, and open circuit of cables,View Ethernet Cable Failure distance.
> 3 modes: Three scanning modes can be selected: normal mode/anti-interference mode/PoE mode.
Port flash: Through the flashing port indicator on the hub/switch, the hub flashes to locate the network port, which can quickly find the network cable on the switch/router. It can be used for 10M/100M/1000M hubs/switches.
> POE tester: Support 802.3af 802.3at two standards, determine which pins are supplying power and detecting voltage, determine the type of PSE (according to/af standard), and detect the presence of AC voltage (50 V - 1000 V). Test the physical state of STP and UTP lan cables.Identifies PoE devices efficiently. Detects crossover methods (unknown/end-span/mid-span/8-core power supply) and polarity. Comprehensive PoE detection, including non-standard, IEEE 802.3AF, and IEEE 802.3AT.
> Continuous test: Quick test results (open circuit, crossover, straight through, open circuit), quickly detect the crimping condition of the crystal head, Shielded network cable can also be used (UTP/STP), Add lan cable pressing function test to test whether the Plug is pressed well.> Receiver with new functions: stand-alone wire test, VFL, crimping test.
Specifications NF 859GS Transmitter Wiremap Cable type CAT5, CAT6 (STP & UTP) Test with switch directly √ Max range 600 m Crimping test Identify response speed ≤ 1 second Test type 8 cores Min. recognition length 10 cm Length Cable type CAT5, CAT6 (STP & UTP) Test range 2~200 m Accuracy ≤20 m ±1.6 m; 20-100 m ±2.4 m; > 100 m 3.2m Breakage location Yes Scan Cable type CAT5, CAT6 (STP & UTP) Max. signal voltage 5V+/-1.0V p-p (audio file) Frequency 455 KHz Dual mode analog/ digital Max range 600 m (RJ45) / 400 m (RJ11) POE Test range DC 5~60V standard / non-standard PoE switch Power supply core/Jumper method End jumper/middle jumper/8-pin power supply/unknown PSE type IEEE 802.3af/at, Non-standard Port flash /Link test Full-duplex/ half-duplex recognition √ Auto-negotiation/ Non-auto-negotiation √ Switch type 10M /100M /1000M LCD display 128*64 Dot-matrix with backlight Power supply 3.7V 1400 mAh lithium battery Size 125*70*32 mm Auto-off time 15, 30, 60, OFF Voltage protection DC 48 V, 5 mA Max working current <150 mA Receiver Sentivity adjustable √ NCV AC 70~1000 V; 50/60 Hz Alignment test Local alignment test and remote alignment test Crimping tast √ Lamp √ Wiremap √ VFL √ Battery type 3,7 V Li-polimer battery Size 200*52*33 mm Other functions Low pressure tips 3.5V+/-0.1V Charging method DC 5 V, 1 A; Type-C Operating temperature/humidity 0~50°C /90% non-condensing Storage temperature -10~50°C Package list:
- 1 * Transmitter
- 1 * Receiver
- 1 * Pair adapter cable
- 1 * Tool bag
- 1 * Charging cable
- 1 * User manual
- size: 24x16x5.5 cm
- weight: 550 g
-
manufacturer Noyafagarantie 2 yearsStock In stockArticle No. noy-859gsWeight 550 g/pcs